Auto Detailing Hacks: Removing Hard Water Stains

The post Auto Detailing Hacks: Removing Hard Water Stains appeared first on Mobile Detailing.

To get you started, we’ve put together a basic explanation of proper procedures for storing your boat throughout the winter.

Choosing whether to store your boat indoors or outdoors, it can be difficult to store a boat safely outside for the winter, but it is not impossible. Finally, there are benefits and drawbacks to both indoor and outdoor storage.

Indoor Storage

If you decide to store your boat indoors for the winter, you have several options. You can winter your boat in an out-of-water storage container, a dry stack, or even an enclosed garage (ideally climate-controlled, but not required). The various solutions vary in price, availability, and convenience of access, but on average, they cost more upfront than outdoor storage.

However, there are several compelling reasons to invest in indoor storage for your boat over the winter. Among them: larger upfront fees assure that your yacht is adequately maintained, with little to no effort on your side. This can save you a lot of money on future cold-weather repair bills. Some storage places, while not as convenient to go there from your house, are extremely close to the lake and will even put the boat back in the water for you when the next season begins.

Outdoor Storage

Outdoor storage at home may appear to be a cheaper choice, but be wary of reducing costs. To keep mold and mildew at bay, you must have a watertight cover for your boat. If you store your boat outside over the winter, you should ensure that it is well prepared and dried before shrink-wrapping it and removing it from the sun for the season.

How to Prepare Your Boat for Storage

When you’re ready to put your boat away for the winter, you should carefully prepare, clean, and detail it one more time. Because all of the components require specific care, this can be a time-consuming process, but it is vital for the health of your boat.

1. Run the boat one last time to check for any mechanical concerns that may require repair or replacement.
2. Clean the boat – Use marine detergent and specialized cleaner for each area that demands it. Dry the hull, wax it, and reapply gel coat as needed. Make sure you know what material your boat is constructed of and choose a cleaner that is appropriate for it. You should also clean any fabric and metal parts. This is also a good opportunity to check for and fix any exterior damage before the winter season arrives.
3. Winterize the engine by flushing it with clean, fresh water, refilling the coolant system, and briefly warming it before replacing the oil and all filters. To prevent corrosion, add fogging oil to the carburetor and spark plug holes. Finally, top off the gas, add fuel stabilizer, and run the engine for 10-15 minutes to allow the stabilizer to absorb into the fuel line.
4. Loosen the drive belts – When you’re no longer using the engine, loosen the drive belts to relieve stress on them. This will allow them to survive longer.
5. Lubricate all moving parts on the boat and engine, including hinges, latches, and linkages, and inspect for damage, residue, and debris that has to be removed while doing so. Once everything has been cleaned and oiled, apply marine packing grease to the steering mechanisms and anywhere else where moisture protection is required.
6. Remove the battery and fully charge it before winter. Because winter is extremely hard on batteries, it’s preferable to keep them in a battery maintainer or trickle charger; alternatively, you can check and top off the charge every week or two throughout the season. Marine batteries should not drop below 20% charge. Do not forget to clean the terminals and cable ends, and coat both in grease.
7. Remove and store portable components – Anything that is not part of or attached to the boat should be removed, cleaned, and stored in a watertight container.
8. Finishing touches – Now that everything has been completed, it’s time to focus on the boat’s finishing details. Give everything a final wax and/or gel coat for extra protection during the winter.
9. Cover and store your boat – Your boat is now ready for storage! By shrinkwrapping the boat, sealing exhaust ports and any other openings with tape, covering the boat with a fitted cover, or storing the boat in an interior setting free of creepy crawlies, you may ensure that no animals or insects can construct winter nests.

We hope this post has shown you how to properly prepare your boat for winter storage. Boat winterization may appear to be a difficult task, but by breaking it down into short, straightforward steps, you can make it much less scary.

If you don’t have the time to spend to thorough boat winterization or are unsure that you can conduct the essential maintenance and repairs, you may always hire a professional marine detailer. These can be found at marinas, dealerships, or through mobile detailing services that travel to wherever your boat is.

The post Boat Detailing: How to Get Your Boat Storage-Ready appeared first on Mobile Detailing.

Motorhome detailing, like detailing for any other vehicle, entails complete interior and exterior cleaning, as well as any small repairs and maintenance work required. Starting from the top down, a motorhome detailer will go through the following steps:

Roof Cleaning

Typically, the roof of an RV or camper gets the most dirt and filth. Most roofs are flat, which means they accumulate dust more easily, and they spend a lot of time outside, beneath trees and exposed to the elements.

When preparing to clean your roof, it is important to understand what material you will be working with. Is the roof made of fiberglass, rubber membranes, or something else? Each material requires a particular type of care, so make sure you understand what you need before you begin.

Fiberglass, for example, is susceptible to oxidization. If your roof appears chalky, you’ll probably require a strong cleanser and fiberglass stain remover. If your roof has a rubber membrane, you’ll want to keep an eye out for dry rot.

You can clean your motorhome’s roof with a pressure washer, a hose with a brush attachment, or wash mitts. If you choose to hand-wash the roof, ensure it can support your entire weight. It’s also a good idea to invest in non-slip knee pads to avoid sliding off the roof.

While you’re up there, be sure to clean and fix any air conditioning units on the roof.

Exterior Wash

After cleaning the roof, wash the motorhome’s complete exterior. This can be done in a variety of methods, including hand washing, pressure washing, or using a “dry” wash solution.

Bug, Tar, and Sap Removal

After you’ve polished and cleaned the exterior of your RV, it’s important to remove any sticky things that won’t come off with a simple wash. Most of this will be bug and tar spatter, but it may also include cleaning sap from the roof.

The best approach to remove these chemicals from your motorhome is with insect and tar remover and an automotive mitt. If the wash mitt isn’t enough, gently scratch hardened grime off with your fingernail.

Washing the roof and front of the RV on a regular basis makes cleaning easier since it prevents sticky areas from hardening.

Clean the awnings

If your motorhome has awnings, you’ll need to open and clean them. Make sure to always use a product designed specifically for the awning’s material. You’ll need something strong enough to remove any pollen, dust, or sap that has accumulated, but delicate enough not to damage the paint or discolor the cloth.

Clean the tires

The tires will be the last thing you wash because you will be washing the motorhome from top to bottom. This can be accomplished with a basic sponge and tire cleanser.

Don’t forget to clean the wheels. You may need to apply extra insect and tar remover to these places and around the wheel hub.

Exterior Wax

After the exterior of the motorhome has been detailed and cleaned, it is time to wax the body. As always, make sure you choose a wax that will not damage the siding. Depending on your demands, you can select wax that is wipe-on and buff-off or spray-on and wipe-off.

Interior Detailing

Finally, it’s time to get the inside in decent enough condition to match the outside. Typically, you will clean the carpets, seats, cup holders, vents, crevices, and any other surfaces in your motorhome. Don’t forget to remove any odors and flush the water lines and tanks.

We hope this list has provided you with all of the resources you need to understand best practices for motorhome detailing! You can use this as a reference for DIY detailing or to double-check the work of a professional RV detailer.

Do not have a professional detailer for your RV yet? Mobile Detailing US has years of specialized experience dealing with a range of materials and can ensure a complete job that meets all of your motorhome’s needs. Check out our packages and services under the RV/Motorhome page.

The post Expert Tips for Motor Home Detailing appeared first on Mobile Detailing.